Stefan Ortega (Manchester City F.C.) and +338.189 goalkeepers trust T1TAN
WITH FINGER PROTECTION

Black Beast 3.0 (FP)

Goalkeeper gloves for artificial turf with finger protection

Regular price £79.99incl. Taxes + Free shipping over £100
Collect + 400 Points in the Goalkeepers Club
Size Finder
COMPLETE YOUR SET:
Create MySMU (+£20)

More about MySMU

Free shipping over £100
Fast and easy returns
Trusted by Premier League goalkeepers

Beast Mode on. Even on artificial turf.

You're the beast on the line. You have the Black Beast 3.0 on on your hands. The artificial turf is no match for you. And the strikers certainly even less. More resistance is not possible. Thanks to Fusion Cut with Flat Cut on the fingertips and 4mm Astro Grip adhesive foam, this glove is significantly more resistant. The perfect grip for artificial turf and hard courts. Catch it and the next ball too!

  • Finger Protection.
    The Beast with extra protection: the flexible and individually removable finger protection elements can prevent unintentional overstretching of your fingers. For maximum safety. In every game.
  • Fusion Cut: for minimal abrasion.
    Mix of flat and negative cut: the seams on the fingertips are not on the inside, but on the outside. This significantly increases abrasion resistance and you can enjoy your glove for longer. Fact on top: Fusion Cut gives your finger a little more room to move.
  • Long live: Astro Grip.
    Our 4mm Astro Grip adhesive foam is specially designed for hard, hard-wearing surfaces such as artificial turf and hard courts. The green dots in the foam look strong and at the same time strengthen the entire structure of the foam.
  • Fixed strap, maximized stability.
    If the landing after the save turns out to be harder, the firmly sewn latex strap gives your wrist more stability. Happy landing!
  • Ultralight: Mechano 2.0
    Lightweight for tough conditions: Thanks to the extremely breathable Mechano 2.0 textile on the backhand, even the toughest fights for the ball feel light as a feather.
  • Punch of the beast.
    Kill every shot with your fist. The silicone claw design gives you the cushioning you need in the ball thunderstorm.
  • The turbo for the Beast.
    Even more grip? No problem! Just get yourself a T1TAN TURBOGLU and turn the durable glove into a robust grip monster.
  • Thumbs up for extra protection.
    The additional silicone layer protects and spares your thumb during every parry and shines with every hard landing.

Tech specs

  • Cut
    Fusion Cut
  • Fit
    Close-fitting
  • Latex
    4mm Astro Grip
  • Gussets
    Textil
  • Grip Protection
    ❌
  • Body Material
    Mechano 2.0
  • Punching-Zone
    Silicone
  • Closure
    Latex (not removable)
  • Wrapped Thumb
    ✅
  • Finger protection
    ✅
  • Wet Grip
    ⭑⭑⭑⭒⭒
  • Dry Grip
    ⭑⭑⭑⭒⭒
  • Shock absorption
    ⭑⭑⭑⭑⭒
  • Abrasion resistance
    ⭑⭑⭑⭑⭑
  • Suitable for
    Artificial turf

FAQ

  • If you're not sure which size to order for our goalkeeper gloves, you can simply use our Size Finder. This will help you to find the right size.

    To the Size Finder

  • Yes, that's not a problem. If, contrary to expectations, you don't like the gloves or they don't fit, you can send them back to us within two weeks of receiving them.

    Unfortunately, this does not apply

    • for gloves that have already been used or damaged
    • if you have removed the protective film
    • if the straps have been printed (exception: gloves with removable exo-strap)

  • We generally only recommend goalkeeper gloves with finger protection if your fingers are weakened because you are still recovering from an injury or have recently overstretched your finger.

    To the finger protection guide

  • These goalkeeper gloves are particularly suitable for use on artificial turf and indoors in training and matches.

  • These goalkeeper gloves are suitable for use in dry weather.

  • Our gloves require special care. That's why you should clean them thoroughly after each use to preserve grip and minimize abrasion.

    We recommend our special goalkeeper glove cleaner TURBOGRIP

    Just watch the following video:

    To the video

  • Professionals normally only use our goalkeeper gloves for a few weeks, as the strain at this level is extremely high. At T1TAN, you get the same quality as the professionals.

    In comparison, the load in the amateur sector is significantly lower, so the average period of use here is 3-4 months. However, the service life depends very much on the care and individual use, which is why it can also vary.

    Please note that abrasion may occur from the very first use. However, this is a natural process and does not restrict further use in any way.

  • Each of our grip foams has its own individual advantages.

    For example, we have a more resistant latex especially for artificial turf or use in the youth sector and a latex especially for wet weather. It always depends on the conditions under which you want your gloves to perform.

    Here you can find an overview of our adhesive foams and compare them:

    To the Helpcenter

Delivery details

It is of utmost importance to us that your products are shipped safely and reliably.

That is why we send packages exclusively via DHL.

The moment your package has been shipped, you will receive a tracking link either via e-mail or Facebook Messenger so that you can track your package online.

Global carriage costs
Country Price Free Shipping Duration in Business Days
United Kingdom 9,90£ from 100£ 3-5
Gibraltar, Irland, Isle of Man, Jersey, Georgien, Guernsey, St. Helena 9,90£ from 100£ 2-4

Important information for deliveries to non-EU countries, except UK: When shipping to non-EU countries, additional taxes or costs (e.g. customs duties) may be incurred as part of your order, which are not paid by us or invoiced by us, but must be paid by you directly to the relevant customs or tax authorities. For details, please contact the relevant authorities.

Size Finder
Left Hand

Find the right size for your hands.

Just measure the base of your middle finger to the tip of your finger.

Personalization details

Any glove we produce can have a custom text printed on the wrist strap.

You can either have one line or two lines printed as you can see in the picture below. The price for personalization is 10.00 £.

You can have the following characters printed:

➕ All numbers from 0-9
➕ All letters and special characters of the QWERTZ keyboard
🚫 Unfortunately, emojis and flags are not possible

IMPORTANT: Unfortunately, different imprints on the right and left glove are not possible.

Notify me when available

Enter your size and email address and we will write to you as soon as this item is available again.

FAQ MySMU

  • MySMU is our tailor-made service that allows you to customize normal goalkeeper gloves according to your wishes. Just like professional goalkeepers do.

    With MySMU you use an existing colorway from the BEAST collection and adjust details such as the cut, the latex and the strap exactly to your wishes.

  • As it is a custom-made product according to your wishes, production and shipping to you takes approx. 3-4 weeks.

  • Unfortunately not. As the gloves are custom-made according to your wishes, they cannot be exchanged or returned. Therefore, please check carefully whether the selected specification meets your requirements.

Reviews